You are here

3 posts / 0 new
Last post
Shutting off Canon software #1
Florian Cortese's picture
by Florian Cortese
April 7, 2011 - 10:14am

I had to install the canon software onto my MBP that came with my 5DII to upload the peripheral illumination correction data on one of my new lenses. Now when I put my CF card into the reader the Canon Image Viewer loads up rather than Aperture. Is there a by-pass/work around to this or simply delete it or all of the Canon software? Any help would be appreciated. Thanks.


Florian Cortese

Robert Sfeir's picture
by Robert Sfeir
April 7, 2011 - 10:19am

Open aperture, go to preferences and one of the tabs, I think the import tab, has a drop down which specifies the action taken when a camera is connected. Set it to what ever you feel works for you. I set mine to do nothing.


Florian Cortese's picture
by Florian Cortese
April 7, 2011 - 1:39pm

R- Duh, that did it! Problem solved. The Canon Image Viewer when it was installed, change the preference for Import to itself. I chose Aperture and opened when the CF card went into the reader. Thanks for the tip. I didn’t even think to look in Preference first. Cheers.


Florian Cortese

You may login with either your assigned username or your e-mail address.
Passwords are case-sensitive - Forgot your password?